Your cart is empty

Scatterplot Sorbo Tapered for Lonex - V2/V3 - 1/4in - 70 Duro


These are laser cut sorbothane pads made by Scatterplot. These “Tapered” style pads are designed specifically for cylinder heads that have a tapered airflow inlets like those from Lonex. Their primary purpose is to decrease the shock load on the gearbox when the piston impacts the cylinder head. By reducing this load, the life of the gearbox shell can be increased and a stronger spring can be used without risking the gearbox shell cracking. Reducing the load is especially important on V2 gearboxes as they have a history of a weak design. They are 1/4" thick which more than corrects most stock AOE (angle of engagement). By correcting AOE it will decrease stress on the pickup tooth of the piston which greatly improves it's life since the pickup tooth is a known failure point. These 1/4" pads are quite thick and push the piston back further than 3/16" sorbo pads which makes the AOE almost perfectly vertical (that is the sector gear pickup tooth upon engagement). This has the advantage of further increasing the durability of the piston since it doesn't get "wedged" upward at all but the further loss of cylinder volume usually means a slight loss in velocity. Installing sorbo to fix AOE must be done in conjunction with the removal of 2nd tooth and possibly part of the 3rd of the piston, or the use of a 14 tooth piston which comes like this. Please make sure the gear engagement is correct when fixing AOE with sorbo. A side effect of cushioning the piston impact is that the impact sound is deadened to more of a thud than a smack. This of course makes the gun more stealthy. This sound change alone is why many people install sorbo pads.

Installation instructions: Remove the stock rubber cylinder head pad. Clean and roughen cylinder head and sorbo pad with a solvent and light sanding. Apply cyanoacrylate adhesive (super glue) to the cylinder head and sorbo and press together. To protect your sorbo please make sure the ports on your piston head are not sharp as this can damage the sorbo. You can optionally glue a protection pad like the neopads or some DIY method to the top of the sorbo to protect it further in high performance applications. There are also countless installation instructions on the Internet.

- 1/4" thickness
- 70 duro hardness
- Laser cut accuracy

Sold Out

To be notified when this product is back in stock please click here.

  • Shipping Weight: 0.0366lbs
  • 0 Units in Stock
  • Manufactured by: Scatterplot

This product was added to our catalog on Wednesday 29 July, 2015.

Let us notify you when this product is back in stock!

Simply enter your details below and we will send you an e-mail when “Scatterplot Sorbo Tapered for Lonex - V2/V3 - 1/4in - 70 Duro” is back in stock!

We will not send you any other e-mails or add you to our newsletter, you will only be e-mailed about this product!