Your cart is empty

Welcome to Clandestine Airsoft

Tons of products just put on sale, check some of them out in the Fire Sale Section.

4/18/20

Looking for some technical Airsoft analysis to check out? Just posted a very in-depth barrel lapping write up by HS5. Link

3/20/20

We wish everyone out there good health in this volatile time and at current we are continuing operations until further notice. We are able to operate in near total isolation with multiple safeguards in place. Stay safe out there people!

3/13/20

Too much stuff that's been sitting around for too long! It's clearance time! Check out the firesale/boneyard section for some deals.

10/28/19

Check out the recent BB Binning project we did in collaboration with HunterSeeker5. We got some pretty impressive improvements in accuracy, so much so in fact we've decided to do sort of an experimental sale of a BB binning service so you can send in your favorite BBs and we'll bin them into 4 bins and send them back.

5/11/19

Hey everybody, sorry so many things have been out of stock, I'm working now on getting everything restocked, ZCI parts are on order as are other product lines. Lots of ZCI barrels, mosfets, lapping kits, and etc will all be back in stock as soon as possible.

7/12/18

We decided to post our lapping testing to show how much improvement the process creates. Our empirical testing of the accuracy improvement the lapping process produces an improvement of 19% in CTC. Shot sheets are in the product listings, the setup was designed to be mid range in terms of other parts to best reproduce most setups. Using one of our 455mm barrels lapped at 100k passes in a mostly stock JG BAR-10 at 15 yards. Besides general "tightening of the screws" the only other upgrade to the gun was the hopup chamber and bucking required to accept the AEG cut barrel. BBs were Eliteforce 0.32g which are decent but not top of the line in terms of accuracy. More info in video form from HSA https://www.youtube.com/watch?v=rzhYR6s2kJE

6/13/18

I'm happy to announce that through a partnership between HS-Armory and Clandestine we are now offering a barrel lapping service with options up to 100,000 passes. When combined with our enhanced cut R-hopped barrels you get a barrel pushing the limits of possible accuracy that is drop-in ready.

10/11/17

ZCI parts are back in stock and Hunterseeker Armory barrels are being restocked. We're working closely with HSA to do another rolling release, however these will be in smaller and more frequent batches. To be notified when a barrel you want is restocked, click the "notify me" link on the product's page. If you miss a drop, no worries, there will be more however you'll have to click "notify me" again in order to once again be added to the notification list.

4/18/17

We now carry the full line of Nukefet Mosfets, the current standard in reliable Mosfets. Nukefets have earned their standing through a long history or proven performance in the most extreme conditions. Check them out!

8/1/16

Hunterseeker Armory barrels are currently being restocked. Unlike previous releases, where barrels were restocked and sold out quickly, these will be done in a rolling release over the next 1-2 months, releasing some barrels every few days.

4/7/16

Everything is back up and running and all orders have been caught up and are now shipping on time. Now that the move is complete, restocking of various brands will start soon.

3/24/16

Clandestine Airsoft will be moving at the end of March, because of this there will be a period of time where no orders can be shipped. Monday the 28th will be the last day anything ships out so orders placed after 8am on that morning won’t be shipped out for probably two weeks depending how smoothly things go. During the break there will also be a sitewide discount of 5%.

1/23/16

Rocket motors are now in stock, they are from the same OEM as SHS. More Enhanced R-hopped barrels will arrive on Wed.

12/21/15

ZCI parts are coming back in stock now along with Rocket brand parts which share the same OEMs as SHS for most of their product line. HSA Enhanced cut R-hop barrels are in installation but will still be awhile due to the holidays and the long install time.

9-28-15

The second batch of new enhanced cut R-hopped barrels are just coming in now, half the batch is in stock and the rest will be here shortly. These new custom machined enhanced cut barrels were developed by HS5 and myself to optimize R-hop performance for overall consistency and accuracy.

There are also some ferrite motors and neo cans being sold at a steep discount. They are great for building high torque motors when combined or the cans can be used to build frankentorque motors with stock armatures.

Also there is now a Clandestine subreddit! /r/clandestineairsoft/

Monthly Specials For March

GMT Version 2 Nylon Tappet Plate
GMT Version 2 Nylon Tappet Plate
$3.50  $3.00
Save: 14% off

PolarStar Fusion Engine V2 (Gen 3)
PolarStar Fusion Engine V2 (Gen 3)
$500.00  $430.00
Save: 14% off
Lonex M4 Tactical 30rnd Simcap – Black
Lonex M4 Tactical 30rnd Simcap – Black
$10.00  $8.00
Save: 20% off
Lonex M4 Tactical 30rnd Simcap – Tan
Lonex M4 Tactical 30rnd Simcap – Tan
$10.00  $8.00
Save: 20% off

Lonex M90SP High Consistency AEG Spring
Lonex M90SP High Consistency AEG Spring
$10.00  $6.00
Save: 40% off
ZCI V3 Stainless Steel Screw Set
ZCI V3 Stainless Steel Screw Set
$3.50  $2.50
Save: 29% off